Sustainability
Aluminum extrusions contain 50% recycled aluminum; 30% is post-consumer content and 20% is pre-consumer. Southern Aluminum products are recyclable. Laminate is GREENGUARD certified for low emissions. Laminate adhesive does not contain urea-formaldehyde resins.
Table Substrate
All top panels, cross bracing and end caps are high strength alloy 6063-T6 extruded aluminum with a smooth finish. Table tops are constructed of individual aluminum boards with laminate adhered to surface. Top surfaces are .080” thick with integral stiffener ribs. Table perimeter is 3mm x 1 9/16” PVC vinyl edge band. All edges on the table top have a flat edge, including corners.
Painted legs are thermal set powder-coated finishes and have the hardest surface and maximum scratch/mar resistant qualities in the industry. Fasteners are aluminum and/or zinc-plated steel.
Table Surface
Inlay surface is high pressure laminate from WilsonArt™ with premium scratch resistant finish, permanently bonded with contact adhesive. Manufacturer provides 5-year laminate warranty.
Legs
All legs, except I Leg style, are welded together for strength, then attached to the table with zinc-plated bolts and nuts. All leg styles are a standard 29.75” height. Powder-coat paint is applied for finishing on all leg styles. Tube openings are covered by caps.
H, Roman, & Seminar Leg Styles
The H, Roman, and Seminar folding legs are 1½” extruded square aluminum with .065” wall thickness high strength alloy 6063-T6 aluminum smooth finish.
Individual Folding Leg Style
The individual folding legs are 1½” square aluminum with .065” wall thickness high strength alloy 6063-T6 extruded aluminum smooth finish. These legs are standard on the square table and on round 48” diameter table.
I Leg Style
This style leg is constructed of 2” outside diameter .125” wall thickness high strength alloy 6063-T6 extruded aluminum smooth finish tubing encasing a full length 3/8” high tensile steel thru bolt with internal spacers, reinforcing plates top and bottom, and washers for even weight bearing distribution throughout the leg. Available in powder-coat paint finish.
Pedestal Base
Click here to view KnockDown Pedestal and Scissor Pedestal
Load Capacity
iDesign Tables™ will support up to 3,000 lbs. of distributed weight. All aluminum leg styles are tested to exceed 2,000 lbs. of direct weight on each leg.
Care and Maintenance
Do not drag table across rough surface as it will damage the finish. Clean with mild soapy water and rinse thoroughly. For dirtier tables, clean with Windex®, Top Job®, Formula 409®, or Mr. Clean®. Non-abrasive household cleaners can be used on stains. If stains persist, make a paste of baking soda and Windex®, and rub into stain. Rinse thoroughly with water.
Standard Perimeter: Flat-Edge
Available Sizes:
| Rectangular | Card | Crescent/Serpentine |
| 18”(w) x 60”(l) x 29.75”(h) | 30"(w) x 30"(l) x 29.75"(h) | 30"(w) x 60"(dia) x 29.75"(h) |
| 18”(w) x 72”(l) x 29.75”(h) | 36"(w) x 36"(l) x 29.75"(h) | |
| 18”(w) x 96”(l) x 29.75”(h) | Crescent/Serpentine Tier | |
| 24”(w) x 60”(l) x 29.75”(h) | Round | 10"(w) x inside radius x 12(h) |
| 24”(w) x 72”(l) x 29.75”(h) | 48"(dia) x 29.75"(h) | 10"(w) x outside radius x 12(h) |
| 24”(w) x 96”(l) x 29.75”(h) | 60"(dia) x 29.75"(h) | |
| 30”(w) x 48”(l) x 29.75”(h) | Pedestal - Round* | |
| 30”(w) x 60”(l) x 29.75”(h) | Half Round | 30"(dia) x 30"(h) |
| 30”(w) x 72”(l) x 29.75”(h) | 60"(dia) x 29.75"(h) | 30"(dia) x 42"(h) |
| 30”(w) x 96”(l) x 29.75”(h) | 72"(dia) x 29.75"(h) | 36"(dia) x 30"(h) |
| 36”(w) x 60”(l) x 29.75”(h) | 96"(dia) x 29.75"(h) | 36"(dia) x 42"(h) |
| 36”(w) x 72”(l) x 29.75”(h) | ||
| 36”(w) x 96”(l) x 29.75”(h) | Quarter Round | Pedestal - Square* |
| 60"(dia) x 29.75"(h) | 30"(w) x 30"(l) x 30"(h) | |
| Rectangular Tier | 30"(w) x 30"(l) x 42"(h) | |
| 10"(w) x 60"(l) x 12"(h) | 36"(w) x 36"(l) x 30"(h) | |
| 10"(w) x 72"(l) x 12"(h) | 36"(w) x 36"(l) x 42"(h) | |
| 10"(w) x 96"(l) x 12"(h) |
*Also available in KnockDown pedestal heights of 30", 42", and adjustable height (30"- 42")
Table Tops
 |  |  |  |  |  |
| Rectangle | Round | Half Round | Serpentine | Quarter, Square, & Round Pedestal | Serpentine Tier Rectangle Tier |
Table Legs
 |  |  |  |  |
| H Style | Roman I | Roman II | Seminar Leg | Individual Folding |
Leg & Perimeter Vinyl Finishes*
iDesign Tables™ feature a laminate inlay with a vinyl edge finish of your choice. Table leg powder coat color will match perimeter finish.*
Accessories
The following options are available for iDesign TablesTM:
| Skirting |
| Skirting Clips |
| Table Trucks |
| Table Tiers |
| Grommet Hole |
| Seminar Leg (only on 24” models) |
| Attached Modesty Panel (only on 24” models) |
