MardiGras Tables | Southern Aluminum | Tables, Folding Tables, Banquet Tables, Banquet Table, Lightweight

Previous Specifications

Sustainability
Aluminum extrusions contain 50% recycled aluminum; 30% is post-consumer content and 20% is pre-consumer content. Southern Aluminum products are recyclable. All aluminum components are smooth finish high strength alloy 6063-T6 extrusions unless otherwise noted.

Table Tops
All top surfaces are .065” thick with integral stiffener ribs and have 1” profile edge with heavy gauge end caps. Tops are constructed of individual aluminum boards bolted together and have longitudinal seams. Table tops will not crack or warp after extended usage or exposure to heat, moisture or sunlight. Tables have permanent scratch-resistant stacking bumpers attached to the legs to prevent damage when stacking. Table corners will withstand a drop squarely on edge/corner from a height of 24” at any temperature without splitting apart, cracking, or creating sharp corners. Tables will not emit toxic fumes, gases or smoke in high temperatures related to a fire (passes California Fire Code 133). Standard tops are finished in powder-coat paint. MardiGras Tables® have a 15-year Warranty.

Rectangular & Square Table Tops
End caps are heavy gauge aluminum, which will take abuse from frequent set-up and take down.

Round Table Tops
Table perimeter utilizes an aluminum band capable of withstanding frequent usage. Tops are constructed of individual boards bolted together and have longitudinal seams.

Folding Legs
All legs are welded together for strength, then attached to the table with zinc-plated bolts and nuts. All leg styles are a standard 29.75” height. Stone powder-coat paint is applied for finishing.

Wishbone Leg Style
The standard Wishbone folding legs are 16-gauge heat-treated aluminum 1¼” diameter shaped into the wishbone pattern for maximum legroom.

H & Roman II Leg Styles
The optional H and Roman II folding legs are 1½” square aluminum with .065” wall thickness for additional strength.

Individual Folding Leg Style
The individual folding legs are 1½” square aluminum with .065” wall thickness. These legs are standard on the 48” square table, 48” round table and ½ round table.

Adjustable H Leg Style
The adjustable H folding legs are 1½” square aluminum with .065” wall thickness. Each leg adjusts in 1” increments from 16” to 24” on the children’s height table and from 24.5” to 34.5” on the standard, adjustable height tables.

Load Capacity
MardiGras Tables® will support up to 2,000 lbs. of distributed weight. All leg styles are tested to 2,000 lbs. of distributed weight.

Care and Maintenance
Do not drag table along rough surface as it will damage the finish. Clean with mild soapy water and rinse thoroughly. Non-abrasive cleaners can be used on stains.

Available Sizes:

Rectangular	Card	Crescent/Serpentine
18”(w) x 60”(l) x 29.75”(h)	30"(w) x 30"(l) x 29.75"(h)	30"(w) x 60"(dia) x 29.75"(h)
18”(w) x 72”(l) x 29.75”(h)	36"(w) x 36"(l) x 29.75"(h)
18”(w) x 96”(l) x 29.75”(h)		Crescent/Serpentine Tier
24”(w) x 60”(l) x 29.75”(h)	Round	12"(w) x inside radius x 12(h)
24”(w) x 72”(l) x 29.75”(h)	48" (dia) x 29.75"(h)	12"(w) x outside radius x 12(h)
24”(w) x 96”(l) x 29.75”(h)	60" (dia) x 29.75"(h)
30”(w) x 48”(l) x 29.75”(h)	66" (dia) x 29.75"(h)	Pedestal - Round*
30”(w) x 60”(l) x 29.75”(h)	72" (dia) x 29.75"(h)	30"(dia) x 30"(h)
30”(w) x 72”(l) x 29.75”(h		30"(dia) x 42"(h)
30”(w) x 96”(l) x 29.75”(h)	Half Round	36"(dia) x 30"(h)
36”(w) x 72”(l) x 29.75”(h)	60" (dia) x 29.75"(h)	36"(dia) x 42"(h)
36”(w) x 96”(l) x 29.75”(h)	72" (dia) x 29.75"(h)
		Pedestal - Square*
Rectangular Tier	Quarter Round	30"(w) x 30"(l) x 30"(h)
12"(w) x 60"(l) x 12"(h)	60" (dia) x 29.75"(h)	30"(w) x 30"(l) x 42"(h)
12"(w) x 72"(l) x 12"(h)		36"(w) x 36"(l) x 30"(h)
12"(w) x 96"(l) x 12"(h)		36"(w) x 36"(l) x 42"(h)