Sustainability
Aluminum extrusions contain 50% recycled aluminum; 30% is post-consumer content and 20% is pre-consumer content. Southern Aluminum products are recyclable. Laminate is GREENGUARD certified for low emissions. Laminate adhesive does not contain urea-formaldehyde resins.

Table Substrate
All top panels, cross bracing and end caps are high strength alloy 6063-T6 extruded aluminum with a smooth finish. Table tops are constructed of individual aluminum boards with laminate adhered to surface. Top surfaces are .080” thick with integral stiffener ribs. Table perimeter is 3mm x 1 9/16” PVC vinyl edge band. All edges on the table top have a flat edge, including corners.

Painted legs are thermal set powder-coated finishes and have the hardest surface and maximum scratch/mar resistant qualities in the industry. Fasteners are aluminum and/or zinc-plated steel.

Table Surface
Inlay surface is high pressure laminate from WilsonArt™ with premium scratch resistant finish, permanently bonded with contact adhesive. Manufacturer provides 5-year laminate warranty. View hundreds of laminate choices in our WilsonArt Standard PDF.

Roman III Leg Styles
The Roman III folding legs are 1½” square aluminum with .065” wall thickness and high strength alloy 6063-T6 extruded aluminum with a smooth finish. Legs are welded together for strength, then attached to the table with zinc-plated fasteners. All leg styles are a standard 29.75” height. Powder-coat paint is applied for finishing on all leg styles.

Load Capacity
T2 Tables™ will support up to 3,000 lbs. of distributed weight. All aluminum leg styles are tested to exceed 2,000 lbs. of direct weight on each leg. Extended table leaf supports 1,000 lbs.

Care and Maintenance
Do not drag table across rough surface as it will damage the finish. Clean with mild soapy water and rinse thoroughly. For dirtier tables, clean with Windex®, Top Job®, Formula 409®, or Mr. Clean®. Non-abrasive household cleaners can be used on stains. If stains persist, make a paste of baking soda and Windex®, and rub into stain. Rinse thoroughly with water.

Available Sizes:

Leg & Perimeter Vinyl Finishes*
T2 Tables feature a laminate inlay with a vinyl edge finish of your choice. Table leg powder coat color will match perimeter finish.*

Actual finishes may vary from displayed or printed images. Samples available upon request.

*View hundreds of laminate choices in our WilsonArt Standard PDF.

Accessories
The following options are available for T2 TablesTM: